bernette button-sew-on foot (b33/b35)

Name: bernette button-sew-on foot (b33/b35)
Brand: Bernette
SKU: 5020601356
Price: 18.15 SGD
Availability: InStock

$18.15

With this presser foot not only buttons of different sizes can be sewn on but also rings or hooks. The bernette button sew-on foot provides a slip-resistant sole so that the button cannot slip away.

User Manual

Instruction
Switch off the machine. Attach the foot as described in the instruction manual.

Applications:
- Sewing on buttons

Stitch type: zigzag stitch
Stitch width: 4 mm, adjusted according to the button
Needle position: centre
Feed dog: lowered/covered

Place the button onto the fabric and move them both under the presser foot. Lower the needle into the left hole of the button by turning the handwheel. Lower the presser foot to hold the button in position, ensuring that the button is aligned correctly. Using the hand wheel, check that the needle goes into the right hole. Adjust the stitch width if necessary. Sew several stitches. Cut the threads long enough, use a hand sewing needle to pull the upper thread to the back and tie off the threads.
If a shank is required, place a darning needle on the button and sew.

For buttons with four holes, sew the front two holes first, then move the sewing forwards and sew the back two holes.

Accessory Catalog

bernette Accessory Catalog

Stitch type: overlock stitches
Stitch width: basic value, adjusted according to the stitch/fabric
*Important: The stitch width can only be adjusted so that, when changing the stitch width, the needle does not strike the pins or bar of the presser foot.
Stitch length: basic value, adjusted according to the stitch/fabric
Feed dog: raised

Important: Use new needles, ball point needles or stretch needles.

Place the fabric under the presser foot so that the fabric edge is against the black guide. Sew, ensuring that, when the needle moves out to the right, it always sews into empty space just to the right of the bar so that there is enough thread to prevent the edge from puckering.

Accessory Catalog

bernette Accessory Catalog

bernette Binder attachment for pre-folded bias tape (b33/b35)

$40.35

The Binder attachment serves to bind edges with pre-folded or not pre-folded bias tape in a finished width of 5 to 7 mm, which are sewn with a utility or decorative stitch.

User Manual

Instruction
Switch off the machine. Attach the foot as described in the instruction manual.

Applications:
Binding edges with bias binding

Stitch type: straight stitch (alternative: narrow zigzag)
Stitch length: 2 - 2.5 mm (or as required)
Needle position: centre
Feed dog: raised

Prefolded bias binding
It is possible to use bias binding with a width of 10-14 mm (final width 5-7 mm).
Non-prefolded bias binding
It is possible to use bias binding with a width of 23 mm (final width 5-7 mm).

Cut the bias binding diagonally at the start, insert into the guide of the binder, and if necessary push it through the hole with a needle or a pair of small scissors. Guide the bias binding backwards under the foot. Insert the edge of the fabric to be bound into the guide between the binding. If necessary, the needle position or the position of the guide channel can be adjusted by loosening the screw so to allow the bias binding to be sewn on close to the edge. Sew on the bias binding, ensuring that the bias binding and the fabric edge are guided in correctly.

Quilted fabrics or several layers of fabric should first be basted or neatened together before binding. Alternatively, zigzag stitch can also be used. Here, the position should be adjusted so that, when the needle moves to the left, it pierces the fabric just next to the binding.