Shop
Roll- and shell hemmer #69 is a special presser foot for hemming soft fabrics such as tricot.
With the aid of a scroll, it turns the fabric under twice, holding it together securely in the channel guide in the sole of the foot until it is sewn. The result is a narrow, slightly three-dimensional hem.
Depending on your choice of stitch, Roll- and shell hemmer #69 can also sew a scalloped hem. In addition, it is suitable for sewing on lace and trim.
As well as for marking seam lines, Tailor-tack foot #7 can be used for sewing elegant embellishments, imitation hemstitch (fagotting), fringe, and 3D effects.
When sewing together two pieces of fabric with Tailor-tack foot #7 the thread tension is loosened slightly, so that the thread can pass easily over the ridge in the center of the foot. The zigzag stitch used forms loose loops which then slide off to the back thanks to the special V-shaped opening on the foot.
For marking seam lines or darts, the fabric is carefully pulled apart after sewing. The Tailor-tack foot #7 can also be used for decorative purposes.
Lap-seam foot #70 enables you to sew precise lapped and flat-felled seams in light and medium weight fabrics.
The square toe on the right of the presser foot acts as a guide for turned-under fabric edges on sportswear, jeans, and men’s shirts.
The small channel on the left-hand side of Lap-seam foot #70’s presser foot tip holds the fabric edge in place for the second line of stitching. This versatile presser foot is also suitable for sewing reversible garments.
Lap-seam foot #70 enables you to sew precise lapped and flat-felled seams in light and medium weight fabrics.
The square toe on the right of the presser foot acts as a guide for turned-under fabric edges on sportswear, jeans, and men’s shirts.
The small channel on the left-hand side of Lap-seam foot #70’s presser foot tip holds the fabric edge in place for the second line of stitching. This versatile presser foot is also suitable for sewing reversible garments.
This foot allows you to sew along longarm quilting rulers to create decorative quilt designs such as lines, feathers, circles etc. Any commercial Plexiglas longarm quilting rulers with a ¼ inch thickness can be used. The height of the sole of the foot makes it possible to quilt along all the edges of these rulers which is of utmost importance especially with circles.
With this technique the feed dog is lowered and the fabric with the Plexiglas ruler is guided manually with the base of the foot resting against the edge of the ruler. Due to the adjustment dial the height of the foot can be adjusted to match the fabric thickness individually so that the fabric can be moved smoothly and without getting stuck. Moreover, this additional option provided by the adjustable foot height extends the scope of applications for BERNINA sewing machines without the function ‘automatic presser foot pressure/presser foot height’.
Short adapter shank #77 is the shortened version of Standard adapter shank #75. Serving as a connecting piece between needle bar and accessory, Short adapter shank #77 allows other manufacturers’ presser feet to be used on BERNINA machines.
If these feet are short-shanked, they won’t fit on the machine’s standard holder without an adapter. By contrast, Standard adapter shank #75 is used e.g. with BERNINA sewing accessories such as Simple binder #85 or Ruffler attachment #86. Please note that, unlike with the Simple binder, the special BERNINA Binder foot #95 is to be used for binder attachments for pre-folded (#87) and unfolded (#88) bias tape. This will ensure the optimal functioning of these presser feet.
Discover Short adapter shank #77 for the hassle-free attachment of short-shanked presser feet!
Jeans foot #8 is especially suited for sewing straight-stitched seams in tough, heavy fabrics such as denim, linen or canvas. Multi-layered fabrics also benefit from its special design.
When combined with the straight-stitch plate and its narrow needle opening, which gives the needle the greatest possible stability, the flat sole of this foot makes it easier for the foot to glide over the thick layers of fabric.
Jeans foot #8 is also ideal for straight-stitching medium weight and thin materials. Please note that the new BERNINA Dual Feed only works with type-D presser feet.
Circular embroidery attachment #83 lets you embroider unusual and decorative circles or semicircles. The attachment is screwed to the free-arm. The center of rotation can be either to the right or left of the needle, with the attaching screw lying flat enough to allow the fabric to feed smoothly over it. A diameter of between 1 inch and 5-5/16 inches (2.5 cm and 13.5 cm) can be set on the slide.
The fabric must be properly reinforced for circular embroidery, so 2-3 layers of stabilizer should be placed under your project. The fabric is put onto the pin at the center of the desired circle and held in place with a rubber cap to prevent shifting during sewing. The Circular embroidery attachment #83 can be used in conjunction with various presser feet, and will enable you to sew circles with any decorative stitches you wish, and even arrange lettering in a circle.
Order the Circular embroidery attachment #83 now, and you too will be able to sew circles of pintucks, cords, and sequins.
Ruffler #86 is a specialist in the simple gathering and pleating of fabrics. Thanks to its variable setting options, both pleat depth and frequency of gather can be varied.
This means that Ruffler #86 can set a pleat with every stitch, every 6th stitch, or every 12th stitch, as you choose. There’s also the option of sewing without pleating, without replacing the presser foot (ruffler setting = 0).
Gathering is performed by the special gathering blade, which causes the up-and-down motion of the needle to catch a bit of fabric each time and slip it under the needle.
The result: neat, even gathering and pleats on home furnishings or garments. The depth of the pleat can be infinitely varied by turning the adjusting screw.
Binder attachment for unfolded bias tape #88 is ideal for bias-binding fabric edges.
The unfolded tape is fed through the attached bias-tape feeder, positioned precisely on the fabric edge, and held in place securely until it is sewn.
This produces neat, even edge bindings on home furnishings, quilts, and items of clothing. Available in three versions for tape widths of 28 mm (scant 1-1/8”), 32 mm (1-1/4”) and 38 mm (scant 1-1/2”), Binder attachment for unfolded bias tape #88 must be used with matching binder foot #95 / 95C for perfect results.
Jeans foot #8D is especially suited for sewing straight-stitched seams in tough, heavy fabrics such as denim, linen or canvas. Multi-layered fabrics also benefit from its special design.
When combined with the straight-stitch plate and its narrow needle opening, which gives the needle the greatest possible stability, the flat sole of this foot makes it easier for the foot to glide over the thick layers of fabric.
Jeans foot #8D is also ideal for straight-stitching medium weight and thin materials. Please note that the new BERNINA Dual Feed only works with type-D presser feet.
With Darning foot #9, small holes and tears in fabrics practically repair themselves. The hopper mechanism combined with the vertical spring presses the foot firmly to the project, preventing the material from pulling up withthe needle during sewing (flagging) and ensuring a neat stitch pattern.
The special shape of Darning foot #9 also makes it ideal for free-hand embroidery, quilting, and creating attractive lace and monograms.
Binder foot #95 is a special presser foot for use in conjunction with binder attachments for pre-folded and unfolded bias tape.
The special design of this presser foot supports and facilitates sewing with Binder attachment #87 and #88. Binder foot #95 enables you to create neat, even edge finishes on quilts, home furnishings and garments, so both simple and elaborate sewing projects are successfully completed in no time flat.
Discover practical Binder foot #95 for Binder attachment #87 and #88 for yourself now, and use it to create attractive edge finishes with bias binding – almost effortlessly!
Binder foot #95C is a special presser foot for use in conjunction with binder attachments for pre-folded and unfolded bias tape.
The special design of this presser foot supports and facilitates sewing with Binder attachment #87 and #88. Binder foot #95C enables you to create neat, even edge finishes on quilts, home furnishings and garments, so both simple and elaborate sewing projects are successfully completed in no time flat.
Discover practical Binder foot #95C for Binder attachment #87 and #88 for yourself now, and use it to create attractive edge finishes with bias binding – almost effortlessly!
The BERNINA Patchwork Foot #97 is designed for straight-stitching and is ideal for sewing ¼" or ⅛" seam allowances and top stitching. It is available for BERNINA machines that have a maximum stitch width of 9mm. The foot print of the sole fits perfectly with the feeding system for the most accurate feeding and stitching when piecing patchwork blocks on a 9mm BERNINA machine.
The Patchwork Foot #97 has an optional move-able seam guide. If the Patchwork Foot #97 comes as a standard accessory with a BERNINA machine, then the seam guide has to be bought separately.
The seam guide aids in sewing perfectly straight ¼" seams. Especially helpful for beginners, this guide also offers extra insurance to experienced piecers.
The Straight Stitch Plate is recommended to be used in conjunction with the Patchwork Foot.
The YouTube videos shows Patchwork Foot #97D - the only difference is that the D-foot can be used with the BERNINA Dual Feed.
The BERNINA Patchwork Foot #97D is designed for straight-stitching and is ideal for sewing ¼" or ⅛" seam allowances and top stitching. It is available for BERNINA machines that have a maximum stitch width of 9mm.
The foot print of the sole fits perfectly with the feeding system for the most accurate feeding and stitching when piecing patchwork blocks on a 9mm BERNINA machine. Patchwork Foot #97D is designed to work with BERNINA Machines equipped with the BERNINA Dual Feed feature.
Included with Patchwork Foot #97D, the move-able seam guide is separate from the foot and is attached to the sewing bed of the machine. Use to aid in sewing perfectly straight ¼" seams. Especially helpful for beginners, this guide also offers extra insurance to experienced piecers.
The Straight Stitch Plate is recommended to be used in conjunction with the Patchwork Foot.