bernette Overlock foot (b33/b35) - BERNINA Singapore

bernette Overlock foot (b33/b35)

$22.20

The Overlock foot facilitates finishing edges professionally and sewing seams similar to overlocking. It is also particularly suitable to create decorative cuffs and seams in the most common knitwear fabrics.

User Manual

+

Instruction
Switch off the machine. Attach the foot as described in the instruction manual.

Applications:
- Overlock seams
- Edge neatening
- Visible hems on stretch fabrics

Stitch type: overlock stitches
Stitch width: basic value, adjusted according to the stitch/fabric
*Important: The stitch width can only be adjusted so that, when changing the stitch width, the needle does not strike the pins or bar of the presser foot.
Stitch length: basic value, adjusted according to the stitch/fabric
Feed dog: raised

Important: Use new needles, ball point needles or stretch needles.

Place the fabric under the presser foot so that the fabric edge is against the black guide. Sew, ensuring that, when the needle moves out to the right, it always sews into empty space just to the right of the bar so that there is enough thread to prevent the edge from puckering.

Accessory Catalog

+

bernette Accessory Catalog

You may also like

Quick view
bernette Binder attachment for pre-folded bias tape (b33/b35)
$40.35
Quick view
bernette Binder attachment for pre-folded bias tape (b37/b38)
$40.35
Quick view
bernette Binder attachment for unfolded bias tape (b42/b48)
$38.35
Quick view
bernette blindstitch foot (b33/b35)
$21.20
bernette Overlock foot (b33/b35) - BERNINA Singapore

bernette Binder attachment for pre-folded bias tape (b33/b35)

$40.35

The Binder attachment serves to bind edges with pre-folded or not pre-folded bias tape in a finished width of 5 to 7 mm, which are sewn with a utility or decorative stitch.

User Manual

+

Instruction
Switch off the machine. Attach the foot as described in the instruction manual.

Applications:
Binding edges with bias binding

Stitch type: straight stitch (alternative: narrow zigzag)
Stitch length: 2 - 2.5 mm (or as required)
Needle position: centre
Feed dog: raised

Prefolded bias binding
It is possible to use bias binding with a width of 10-14 mm (final width 5-7 mm).
Non-prefolded bias binding
It is possible to use bias binding with a width of 23 mm (final width 5-7 mm).

Cut the bias binding diagonally at the start, insert into the guide of the binder, and if necessary push it through the hole with a needle or a pair of small scissors. Guide the bias binding backwards under the foot. Insert the edge of the fabric to be bound into the guide between the binding. If necessary, the needle position or the position of the guide channel can be adjusted by loosening the screw so to allow the bias binding to be sewn on close to the edge. Sew on the bias binding, ensuring that the bias binding and the fabric edge are guided in correctly.

Quilted fabrics or several layers of fabric should first be basted or neatened together before binding. Alternatively, zigzag stitch can also be used. Here, the position should be adjusted so that, when the needle moves to the left, it pierces the fabric just next to the binding.

Accessory Catalog

+

bernette Accessory Catalog

bernette Overlock foot (b33/b35) - BERNINA Singapore

bernette Binder attachment for pre-folded bias tape (b37/b38)

$40.35

The Binder attachment serves to bind edges with pre-folded or not pre-folded bias tape in a finished width of 5 to 7 mm, which are sewn with a utility or decorative stitch.

bernette Overlock foot (b33/b35) - BERNINA Singapore

bernette Binder attachment for unfolded bias tape (b42/b48)

$38.35

The binder attachment creates practical edge finishes with unfolded bias tape in a width of 40 to 50 mm. Self-cut bias tape or cross grain knit strips can also be used for a professional look.

bernette Overlock foot (b33/b35) - BERNINA Singapore

bernette blindstitch foot (b33/b35)

$21.20

This foot is most suitable to sew blindhems or to topstitch edges. The stitches only pierce the hem so that the stitch holes are hardly visible on the right side of the fabric.

User Manual

+

Instruction
Switch off the machine. Attach the foot as described in the instruction manual.

Applications:
- Blind hems
- Topstitching edges

Stitch type: blindstitch
Stitch length: can be adjusted as required
Feed dog: raised

Prepare the hem by pressing around the hem. Fold back the hem so that the edge of the fabric is next to the folded edge. Fabrics that fray should be neatened beforehand. With lightweight fabrics, the edge of the hem can be placed under the fold.
Position the fabric so that the needle stitches straight through the folded edge when it moves to the left. Turn the guide screw to align the guide with the folded edge. Slowly sew, guiding the guide along the fold. If necessary, adjust the position of the guide again.

Instruction
The blindstitch foot can be used to sew pintucks by topstitching along the fabric fold which is placed directly against the presser foot guide.

Accessory Catalog

+

bernette Accessory Catalog

bernette Overlock foot (b33/b35) - BERNINA Singapore

bernette Blindstitch foot (b37/b38)

$23.70

This foot is most suitable to sew blindhems or to topstitch edges. The stitches only pierce the hem so that the stitch holes are hardly visible on the right side of the fabric.